How much is a 3d scan cost?

3D scanning is practically expensive. The tools used are not ordinary as we want to achieve prime results for the services. The cost would usually depend on the size of the object scanned. But it would be pricier if it’s a full space you decide to scan with. But of course, 3D2GO would want to do everything 3D for you so we could always reach a compromise on the price once you ask for a quotation.

But did you know that you can make use of an ordinary camera? Just add some clever software. As a result, you can have your own 3D scanning camera. No need to invest in new equipment. All you need is a regular 2D camera and some whack techniques

But of course, there are smaller details to consider. Because you are basically using already existing equipment, there is going to be a need to practice. This enables optimizing the scan. 

Listed below are some of the accessories for 3D scanners:

CALIBRATION PANELS

Create precise scans by calibrating the scanning software with these glass panels. Works flawlessly with all HP and David Vision Systems 3D Scanners

DAVID LASERSCANNER PRO EDITION 3

This software allows inexpensive 3D scanning of surfaces. All you need is 

• Video camera
• Line laser 
• A “corner” as background

SLS CAMERA

Captures 25 frames per second at a resolution of 1280 x 960 px

laser scanning buildings

3D2GO uses a high definition scanning technology. As a result, we offer the best quality of lidar scanning services. We offer these to anyone in need especially project managers, engineers, and architects. They will be able to better visualize the 360 conditions of any facility or site.

We are able to offer our scanning services even off our site. Our scanner is portable and gives us the freedom to expand our offer to almost anywhere in the country. 

Below are the scanners we use and are selling as well:

CALIBRY 

Hand-held 3D scanner meant to capture objects from 20cm to 10m in length. The name invokes images of Colibri (aka “Hummingbird”) which is known for its small size and incredible speed. It is also consonant with the word “calibrated” – accurate, precise.

DAVID SLS-2

Employs the innovative Structured Light technology. It allows precise 3D scanning in a matter of seconds. This scanner is mobile and can be placed easily in front of the surface for scanning. It only takes a few clicks for a digitized 3D model to pop up on the screen. With its speed, you can easily save time even by scanning different angles for a close 360° model. 

Any size from coin to couch is possible!

Inclusions:

• Camera + DAVID-4-PRO software on USB stick
• Sliding rail for quick setup
• Compact calibration panels
• Video projector with special lens for large focal range

DAVID STARTER KIT

The DAVID Laserscanner Starter-Kit Version 2 is based on laser 3D scanning technology. The 3D scanner is delivered with the DAVID-4 software suite.

THOR3D 3D SCANNER DRAKE

Drake is a hand-held, portable, and wireless 3D scanner. It can capture almost any object, large or small. The scanner has interchangeable lenses which allow the user to scan any sized object.

3D scanning vs. lidar services

3D scanning is a more common and basic kind of lidar use. 

Scanners use laser line probes that consist of small laser dots aligned in rows. The laser dots are then projected onto a surface. It is being read by a camera that is already aligned at a small angle to the laser. 

Laser scanning does not provide an infinite number of points but rather a very high quantity. The areas between the dots are not captured. It is because the spacing between laser dots represents the resolution of the scan. The closer the spacing, the better the resolution.

Too large or sensitive to a project to bring to us? We’re one click away.

Get in touch with us by sending us files in .obj or .stil format in our email address management@my3d.com.ph.  You can also reach us through our Facebook and Instagram pages today!