3d Coating Spray
The 3D Coating Spray is a ready to use suspension of white developing particles in a fast drying solvent. It produces an opaque white coating to prepare shiny, translucent or very dark objects for a 3D scan. Simply spray a thin layer of whiting onto the surface, which will make it matt and bright. A thin layer will even preserve fine surface details below 0.2mm. The whiting can be washed away easily with a brush or water and sponge.
- Do not inhale the spray! Use it only outdoors and/or wear respiratory protection (particulate matter).
- The spray may damage sensitive materials or deposit in rough surfaces. A permanent alteration of the surface (e.g. whitening) may occur! Please test both applying and removing the spray on small patches or worthless objects with the same surface.
- Also please pay attention to the details printed on the spray can.
Because of transport regulations, this item can be shipped to the following countries of the European Union only!
- Austria
- Belgium
- Czech Republic
- Denmark (ZIP 50-99)
- Great Britain(only mainland)
- Hungary
- Italy (only mainland)
- Luxemburg
- Monaco
- Netherlands
- Portugal (only mainland)
- Spain (only mainland)
- Our customer service will contact you in exceptional cases.
- 500 ml 3D Coating Spray (yields approximately 2.5 m²)
Related Products
-
SLS Camera
The brand-new DAVID USB CMOS Monochrome Camera captures 25 frames per second at a resolution of 1280 x 960 px
-
TT-1 Turntable
In combination with the DAVID 3D Scanner Software (since Version 4) it will make 360° scanning much easier. The scanobjects are simply placed on the TT-1 and subsequently you can rotate and scan automatically in different angles by using the DAVID 3D Scanner Software.
-
DAVID4-PRO, DAVID4-ENTERPRISE
This software allows inexpensive 3d scanning of objects and surfaces.
Reviews
There are no reviews yet.